Basic Info.
Solid Content
75%(73%-77%)
Specification
RoHS, SGS, MSDS
Product Description
Dielectric Compositions for Aluminum(JZ30031)
LEED JZ3003X dielectric pastes are desiged to be used together to insulate type 3003 or 3103 aluminum substrates, and non-toxic element up to European RoHS environmental regulation.They mach with the TEC of aluminum substrate well. The total dielectric fired thickness must exceed 80 micrometers after printing three layer, the breakdown voltage can achieve 1800VAC, designed for aluminum substrate, heating element for aluminum substrate.
Recommended Technical Information & Notice:
Printing:It is recommended the lustration grade of appliance and circumstance to be more than tem thousand degree, it should be guarantee that the room temperature and appliance temperaute remains 26±2ºCduring printing. Keep stir it slowly and fully before using. If take out of from icebox or icehouse firstly, please place it in the printing house until it return to room temperature , if add the thinner,should stir fully, or will affect performance of pastes.
Drying:It can be dried both in infrared stove and rotary dry furnace, the peak temperature of drying is 250~300 degree centigrade, the drying time can be regulated according drying situation.
Firing:Firing is one of most imporant data for affecting the performance of paste. The best firing temperature should be regulated according the detailed machines so that can obtain the uniform,glossy fired film.
Thinning:JZ3003X composition is optimized for screen printing and thinning is not normally required.Use the LEED recommended thinner for laigh adjustments to viscosity of to replace evaporation losses. The use of too much thinner or the use of a non recommended thinner may affect the rheological behavior of the material and its printing chracteristics, and stir fully after thinning.
Compatibility:JZ3003X has good compatibilityes with LEED conductive paste DT550X and resistior paste DZ55XX.
Transportation and Storage:during transportation and storage should protect against the tide and contamination. Containers may be stored in a clean, dry and stable environment at room temperature (between 5ºC~20ºC),with their lids tightly sealed.
Precautions:
LEED JZ3003X dielectric paste is an environmental insulator material and non-toxic element up to European RoHS regulation and RoHS regulation.Harmful if swallowed inhaled when in use. Avoid contact with eyes, wash thoroughly after handling, and see doctor soon.
Address:
No. 88 Jinlong Rd, Xinma Industrial Zone, Zhuzhou, Hunan, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Electrical & Electronics
Management System Certification:
ISO 14001, ISO 9001
Company Introduction:
Hunan LEED Electronic Ink Paste Co., Ltd. Specialized in electronic paste developing and production for more than ten years. We are Longer than the R & D, diligent service, pursuit of excellence. All products are to follow environmental protection, energy saving ideas. All product have the same testing conditions and experimentation with our customer′s using conditions in order to have the real feeling of our customers. We do hope to provided a new choices for your higher requirement through our product and service. At the same time, it will also reflect our company′s own social value.
Adopt independent R&D and cooperated with University, our company undertake the "national 863 project" and National SME Innovation Fund project. Formed several series of electronic paste with Completely independent intellectual property rights.